AIM

To assemble a working LED project board with switch and battery.

REQUIREMENTS

• 9V Battery (with connector)

• Switch (toggle or push button)

• LEDs (1–3)

• Breadboard OR wooden board with nails as connectors

• Wires (insulated)

• Electrical tape / hot glue (for fixing)

• Decorative chart paper or labels

WORKING – Step by Step

Step 1: Mount Components

• Fix the switch and LEDs on the board (breadboard/wooden board).

• Place the battery holder securely.

Step 2: Wiring

• Connect battery positive (+) → switch → LED (long leg).

• Connect LED short leg → battery negative (–).

• Use tape to insulate any open wire joints.

Step 3: Test Circuit

• Turn switch ON → LED should glow.

• Turn switch OFF → LED should go off.

Step 4: Presentation

• Label each component: Battery, Switch, LED, Wire.

• Decorate your board to make it attractive.