|
Problem |
Possible Cause |
Solution |
|
Servo not moving |
Wrong pin or no power |
Check wiring and servo connection |
|
Tap opens randomly |
IR sensor too sensitive |
Adjust sensor sensitivity knob (if available) |
|
No detection |
IR sensor blocked or misaligned |
Clear sensor path and ensure correct orientation |
Lesson 1: What is an Actuator?
0/5
Lesson 2: Turn Signals into Motion
0/5
Lesson 3: Timing and Control
0/8
Lesson 4: Smart Alerts and Feedback
0/10
Lesson 5: Automate with Purpose
0/11
Lesson 6: Show Your Smart Machine
0/10